Skip to content

Ultraviolet–visible spectrophotometer

A UV-Vis spectrophotometer passes light of a selected wavelength through a sample held in a cuvette and measures how much is absorbed. Scanning across wavelengths gives an absorbance spectrum, and the reading at a chosen wavelength supports identification checks and measurement of how much absorbing substance is present.

UV-Vis spectrophotometer: block diagram Light from the lamps enters the monochromator, which selects a narrow band of wavelengths. The band passes through the cuvette in the sample compartment to the detector, and the signal goes to the data system. A blank and reference path is used alongside the sample to set the zero. Light sources (lamps) Lamps Monochromator with slits Monochromator Sample compartment and cuvette Cuvette Sample compartment Detector Detector Blank and reference beam Blank and reference Data system Data system

Parts

Sources

  1. [1]Instrumental Analysis (LibreTexts). Section 13.4: Instrumentation (UV/Vis absorption instrument designs and sample cells). LibreTexts Chemistry, Analytical Chemistry bookshelf. Page read November 2026. (2026), Instrument designs (beam arrangements, diode array) and Sample Cells sections https://chem.libretexts.org/Bookshelves/Analytical_Chemistry/Instrumental_Analysis_(LibreTexts)/13%3A_Introduction_to_Ultraviolet_Visible_Absorption_Spectrometry/13.4%3A_Instrumentation
  2. [2]JASCO. UV-Visible Spectrophotometer: Instrumentation and How It Works. JASCO Learning Center, theory pages (undated; page read November 2026). (2026), Monochromator, light sources, bandwidth, detectors, beam arrangements, stray light sections https://jascoinc.com/learning-center/theory/spectroscopy/uv-vis-spectroscopy/instrumentation/
  3. [3]Shimadzu Corporation. Light Sources for Spectrophotometers. Basics of UV-Vis-NIR spectroscopy, essential knowledge pages (undated; page read November 2026)., Deuterium lamps, halogen lamps and lamp switching sections https://www.shimadzu.com/an/service-support/technical-support/uv/essential_knowledge/lightsources.html
  4. [4]Shimadzu Scientific Instruments. What is stray light? Molecular spectroscopy FAQ, resolution and stray light (undated; page read November 2026)., Definition, sources and ways of reducing stray light https://ssi.shimadzu.com/service-support/faq/uv-vis/resolution-and-stray-light/3/index.html
  5. [5]Shimadzu Scientific Instruments. How does stray light influence high absorbance measurements? Molecular spectroscopy FAQ, resolution and stray light (undated; page read November 2026)., Effect of stray light on high absorbance readings https://www.ssi.shimadzu.com/service-support/faq/uv-vis/resolution-and-stray-light/4/index.html
  6. [6]MIT Department of Materials Science and Engineering, DMSE Breakerspace. Horiba Duetta Fluorescence and Absorbance Spectrometer (user guide page: warm-up, blanks, cuvette handling, troubleshooting, shutdown). Undated; page read November 2026. (2026), Warm-up and lamps, blank and baseline, cuvette handling, troubleshooting and shutdown sections https://breakerspace.mit.edu/instruments/uv-vis.html
  7. [7]Vernier Software and Technology. My Spectrometer is not working properly. It won't calibrate or is giving very noisy data. Technical Information Library; published 20 May 2019, updated 30 April 2025. (2025), Light source problems, cuvettes and blank sections https://www.vernier.com/til/?p=2354
  8. [8]MICROSOLV Technology Corporation. Fluctuations in readings when using the UV-Vis Calibration Kit: Tech Information (lamp degradation, optics and blank checks). Tech Information article aa-01360; first dated 3 April 2013. (2013), Causes, lamp degradation symptoms, replacement advice and optics sections https://www.mtc-usa.com/kb-article/aa-01360